OIL Water Separators and Wastewater Treatment Systems

 

Oil/Water Separators

Highland Oil/Water Separators are designed for the removal of free-floating oil, grease, and settleable oily coated solids from oil/water mixtures associated with many types of Industry.

The separators can be installed below or above grade to help facilities comply with tough spill and discharge regulations and the ability to produce effluent with less than 10 mg/l of free oil.

 Highland has the first complete line of Oil/Water Separators constructed to the UL-SU2215 specifications. These high performance units are custom fabricated to meet and exceed the strict construction and performance criteria established by Underwriters’ Laboratories to be labeled UL-2215. Single-walled and double-walled construction with a variety influent and effluent product handling options is available.

 Highland Cylindrical Separators (Below Ground)
 

  Highland Rectangular Separators (Above Ground)

  •  Can-Am has been providing Separation Technology to a variety of industries for over 40 years
  • We are proud to be the Canadian representatives of Highland Tank
  • We specialize in custom solutions for Hydro Power Generators

 

 

New CORELLA™ “self-cleaning” design performs better than traditional plate coalescers.

All Highland separators are equipped with our patented Corella® coalescers that combine the features of both a flat plate coalescer and a corrugated plate coalescer into a new “self-cleaning” design that performs better than traditional plate separators. Corella® accelerates the separation process and greatly reduces the level of oil and oily coated solids discharged into municipal sewer systems.

 

Engineering information

Please Contact Can-Am Instruments for detailed design assistance 1-800-215-446

 

Note: The above articles were condensed from material contained in the Highland Tank Oil/Water Separator’s Engineering Catalog. Contact Can-Am Instruments at 1-800-215-4469 for a free copy of the Oil/Water Separator Engineering Catalog.

 

Product Sizing

Oil/Water Separators Sizing Guide

 

Oil Water Separator Drawings and Specifications

http://www.highlandtank.com/wastwater-drawings-specs

 

Options and accessories

http://www.highlandtank.com/aboveground-tanks-accessories-petroleum-and-chemical

http://www.highlandtank.com/underground-tank-options-accessories-petroleum-and-chemical

 

Please Contact Can-Am Instruments for detailed design assistance 1-800-215-4469

 

Grease Interceptors

grease stopper

Automatic Grease InterceptorsLowe Engineering Model AGI Automatic Grease Interceptors are designed to intercept and remove large quantities of fats, oils, and grease (FOG) discharged from food service facilities and large commercial/institutional kitchens, which might interfere with the proper drainage and treatment of municipal wastewater. Lowe Automatic Grease Interceptors range in size from relatively small units, allowing installation in a kitchen under a sink or other limited space to large higher volume units. AGI’s incorporate an electrically powered grease-skimming device. During operation, the grease is separated by gravity floatation where it can be skimmed off the top surface of the water on a time or event controlled basis. The skimmed grease is collected in a waste disposal container for disposal or recycling.

Passive Grease Interceptors

Highland Passive Grease Interceptors (PGI) help restaurant owners comply with the EPA’s Sewer Pretreatment Regulations. These gravity grease interceptors are designed to intercept and collect large quantities of sewer clogging fats, oil, and grease (FOG) and solid food waste discharged from large commercial or institutional kitchens. Highland grease interceptors prevent the discharge of FOG into the sanitary sewer system and aid in the prevention of sanitary sewer blockages to protect the sewer system from sanitary sewer overflows (SSOs). Highland PGI, with their advanced “diffusion and switchback baffling system”, retain wastewater long enough to allow liquefied grease to cool down, separate, and congeal and allow for solid material to settle. They are available in large volumes to accommodate specified retention times, even 30 minutes or greater. Aboveground rectangular or cylindrical interceptors and made-to-order designs are available so that you can customize volumes, compartments, inlets, outlets, or baffles to satisfy specific code requirements. Custom Sampling Ports are also available to aid in monitoring gravity discharge quality.

 

Grease Interceptor Engineering Information

http://www.highlandtank.com/grease-interceptor-products

Please Contact Can-Am Instruments for detailed design assistance 1-800-215-4469

 

 

 

 

 

 

 

 

Calculate the size of a Passive Grease Interceptor

Please Contact Can-Am Instruments for detailed design assistance 1-800-215-4469

Find out more about Highland Tank Wastewater Treatment Systems at http://www.highlandtank.com/wastewater-treatment-systems

OIL/WATER SEPARATORS

OIL/SAND INTERCEPTORS

DEEP SUMP BASINS

COLLECTION CATCH BASINS

ADVANCED HYDROCARBON FILTRATION SYSTEMS

ELEVATOR OIL INTERCEPTOR & SUMP PUMP INTERCEPTOR

SOLIDS STORMWATER INTERCEPTORS

MANUAL OIL INTERCEPTORS

HIGHCYCLE WASHWATER RECYCLE SYSTEM

OPTIONS AND ACCESSORIES

SELECTING / SPECIFYING